Jbl speaker charging cord full#
Using this method, you can get a full charge on your JBL Charge 4 in just about four hours. This cable has a USB-C plug on one end and a USB 2.0 plug on the other end. We recommend using the USB-C charging cable that comes with the device. It even comes with a USB-C charging cable in the box. If your USB adapter has those numbers (or higher) written on the label, it can charge the JBL Charge 4 effectively. You only need to make sure that the adapter matches the power rating listed in the device specifications.įor the JBL Charge 4, that’s about 5 volts at 2.3 amps. You may have an appropriate adapter already. You can use just about any USB charger for your Charge 4.
However, if you don’t want to use the official charger, there are other options. Thankfully, JBL sells the charger, or USB adapter, separately. You may have noticed that the JBL Charge 4 doesn’t come with a charger. With these steps finished, your JBL Charge 4 is fully charged! Now you can enjoy up to 20 hours of continuous music! The Perfect Charger for Your JBL Charge 4
If this is not firmly pressed into place, water may ruin your speaker. This door keeps the ports from getting wet, even when the speaker is submerged. This is especially important if you are planning to use your JBL Charge 4 in or near water. After removing the charging cable from the back of the speaker, make sure that the compartment door is firmly closed.Īrticle post on: This is the most important step in the charging process. You’ll need to use this cable often to make sure that your JBL Charge 4 maintains battery life. Make sure to store the cord in a safe location, so that you know where it is. Take care not to yank too hard or pull it too much, as this can cause damage to the cord or the port. Gently pull the USB-C charging cord out of the port on the back of the speaker. Once all of the indicator lights are illuminated, it’s time to unplug the charging cord. Make sure to allow the speaker to charge completely before removing the charging cable. One full charge of the battery will allow you up to 20 hours of use. Once all five lights are illuminated, the speaker is completely charged and ready to go. The indicator lights on the front of the speaker indicate the level of charge. It takes the JBL Charge 4 about 4 hours to fully charge the battery. Now, you must let it recharge completely. Allow the JBL Charge 4 to Recharge Completely Just make sure that the power strip is on so that your speaker can charge. You can also plug the adapter into a power strip. Then, simply plug the adapter into the wall. Make sure that the outlet you choose is on and receiving power. With the cord plugged into the USB adapter, it’s time to plug the adapter into a wall outlet. While the Charge 4 does not come with this adapter, you can purchase it separately from JBL. We recommend using JBL’s adapter, especially if you have another JBL speaker. Plug this end of the charging cable into your USB wall adapter. The USB 2.0 side of the cable is rectangular, and there is only one way to insert this side of the cord. The other end of the charging cord should be larger. Make sure that the cord is securely seated inside the port. You can insert the USB-C cord into the port either way – there isn’t a way to insert it incorrectly. It has a lightning bolt etched into the plastic underneath it. This is the smaller port on the back of the speaker. Plug the USB-C cord that came with the speaker into the USB-C port. Plug the USB-C Cord into the JBL Charge 4 There’s a USB 2.0 port (for charging your phone or another device), a 3.5mm headphone jack, and a USB-C port. It has a seal to protect the electronics from water. The door to the compartment may be difficult to remove, but that’s because the speaker is waterproof. This port is located inside a compartment on the back of the speaker, located near the bottom. The JBL Charge 4 charges through the USB-C port found on the back of the speaker. The first step towards charging your Charge 4 is to find the proper port. When the battery gets low, you’ll need to plug your JBL Charge 4 into a power source.
0 kommentar(er)
